HKXYTECH MTL MTL4510 Safety Barriers MTL4510 Isolation Barrier backplane mounting MTL4510 Isolated Barriers In Stock Original and genuine

Detailed Information

HKXYTECH MTL MTL4510 Safety Barriers MTL4510  Isolation Barrier backplane mounting MTL4510 Isolated Barriers In Stock Original and genuine

Descrption of HKXYTECH MTL MTL4510 Safety Barriers MTL4510  Isolation Barrier backplane mounting MTL4510 Isolated Barriers In Stock Original and genuine :

MTL4510 – MTL5510 SWITCH/ PROXIMITY DETECTOR INTERFACE 4-channel, digital input

General specifications of HKXYTECH MTL MTL4510 Safety Barriers MTL4510  Isolation Barrier backplane mounting MTL4510 Isolated Barriers In Stock Original and genuine :

The MTLx510 enables four solid-state outputs in the safe area to be controlled by up to four switches or proximity detectors located in a hazardous area. Each pair of output transistors shares a common terminal and can switch +ve or –ve polarity signals. A range of module configurations is available (see Table 1) through the use of selector switches. When proximity detector modes are selected, LFD is enabled and the output switches to OFF if a line fault is detected.

SPECIFICATION of HKXYTECH MTL MTL4510 Safety Barriers MTL4510  Isolation Barrier backplane mounting MTL4510 Isolated Barriers In Stock Original and genuine :

See also common specification Number of channels 4, configured by switches Location of switches Zone 0, IIC, T6 hazardous area Div 1, Group A hazardous location Location of proximity detectors Zone 0, IIC, T4-6 hazardous area if suitably certified Div 1, Group A, hazardous location Hazardous-area inputs Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR) Voltage applied to sensor 7 to 9V dc from 1kΩ ±10% Input/output characteristics Normal phase Outputs closed if input > 2.1mA (< 2kΩ in input circuit) Outputs open if input < 1.2mA (> 10kΩ in input circuit) Hysteresis: 200µA (650Ω) nominal Line fault detection (LFD) (when selected) User-selectable via switches on the side of the unit. Open-circuit alarm on if Iin < 50µA Open-circuit alarm off if Iin > 250µA Short-circuit alarm on if Rin < 100Ω Short-circuit alarm off if Rin > 360Ω

 Note: Resistors must be fitted when using the LFD facility with a contact input 500Ω to 1kΩ in series with switch 20kΩ to 25kΩ in parallel with switch

Ordering codes related to HKXYTECH MTL MTL4510 Safety Barriers MTL4510  Isolation Barrier backplane mounting MTL4510 Isolated Barriers In Stock Original and genuine :

Good price and huge stock for HKXYTECH MTL MTL4510 Safety Barriers MTL4510  Isolation Barrier backplane mounting MTL4510 Isolated Barriers In Stock Original and genuine

We can also supply the following products with competitive price: